Nuclear auxiliary facility · Europe
Non-safety ventilation odor controlPellet media selected under the facility’s procurement specification and change-control process.
Qualified water and ventilation adsorption duties
Nuclear Energy and Nuclear Power
Activated carbon can serve selected nuclear-facility water and ventilation duties, including odor, organic and radioiodine-control systems. Every nuclear application requires project-specific qualification, traceability and compliance with the plant’s safety classification and governing standards.
Discuss Your ProjectIndustry overview
Adsorption designed around the process.
Activated carbon can serve selected nuclear-facility water and ventilation duties, including odor, organic and radioiodine-control systems. Every nuclear application requires project-specific qualification, traceability and compliance with the plant’s safety classification and governing standards.
Common carbon options: Specialty Impregnated · Pellet · Coconut Shell · Coal-based Activated Carbon
Product parameters
Activated carbon selection table.
Recommended starting ranges for technical discussion. Final values depend on the stream, test method and buyer specification.
| Carbon option | Iodine value | Typical size | Suitable conditions | Selection effect |
|---|---|---|---|---|
| Specialty impregnated carbon | Project-qualified | 8×16 / 12×30 mesh | Radioiodine ventilation systems | Qualification required for target isotope |
| High-strength pellet | 900–1100 mg/g | 3 mm / 4 mm | Selected ventilation gas duties | Low dust and stable pressure drop |
| Acid-washed GAC | 1000–1200 mg/g | 12×40 mesh | Selected liquid polishing duties | Low ash; project validation required |
| Coal-based GAC | 800–1000 mg/g | 8×30 mesh | Non-safety auxiliary treatment | Broad adsorption range |
Treatment process
From inlet to verified outlet.
The exact equipment train is confirmed after reviewing site data and target limits.
- 01Safety classification review
- 02Contaminant and condition definition
- 03Qualified media / sample testing
- 04Controlled installation & surveillance
- 05Licensed spent-media management
Project cases
International industrial references.
Buyer identities are withheld. The examples show representative project briefs and engineering approaches; performance is site-specific.
Power-station water system · Asia
Selected auxiliary-water organic polishingLow-ash granular carbon evaluated in a segregated, non-reactor water duty.
Engineering contractor · Middle East
Concept design for iodine filtrationImpregnated media requirements reviewed for humidity, residence time and project qualification; final approval remained with the owner.
Frequently asked questions
Technical answers for buyers.
Need a faster review? Send the available process data with your inquiry.
No assumption should be made. Safety-related use requires the exact project specification, qualification tests, traceability and approval by the responsible engineering and regulatory parties.
Samples and available batch documents can be discussed after reviewing the procurement specification and intended classification.
Provide target species or isotope, concentration, humidity, temperature, airflow or water flow, residence time, radiation environment and applicable test standards.
Potentially contaminated carbon must be characterized, packaged, transported and disposed of only under the facility procedures and applicable licensed regulations.
B2B inquiry
Get a grade recommendation.
Send your operating data. Our export team will review the carbon form, specification and trial quantity for nuclear energy and nuclear power.
EmailMaggie@mecarbon.cn
WhatsApp+86 19179826030